The driving test is changing on 4th December 2017 and one of the differences will be how the Show me/Tell me questions are conducted:
‘Tell me’ questions will be at the start of the test, when the car isn’t moving.
‘Show me’ questions will be asked when you are driving the car, during the practical test.
To help you prepare, we have provided a list of the Show me/Tell me safety check questions that the examiner will ask during your driving test.
The examiner will ask you a ‘Tell me’ question when you reach the car and this will be asked before the driving element of the test begins. During the driving element of the test, the examiner will ask you to demonstrate that you can operate one of the following ancillary controls.
You should note that the ‘Show me’ questions start by the examiner saying, ‘when it’s safe to do so’. It is important that you choose an appropriate time to carry out the request. For instance, it would not be deemed ‘safe to do so’ if you operated the car’s dipped headlights when another road user is in the immediate vicinity, this could mislead the other road user.
You should be familiar with the location, function and use of the relevant controls. You should be fully conversant with the method of using each control component on the vehicle that you will be using on the day of your test.
DVSA SAFETY-CHECK QUESTION BANK FOR CARS:
Brakes should not feel spongy or slack. Brakes should be tested as you set off. Vehicle should not pull to one side.
Manufacturer’s guide, use a reliable pressure gauge, check and adjust pressures when tyres are cold, don’t forget spare tyre, remember to refit valve caps.
The head restraint should be adjusted so the rigid part of the head restraint is at least as high as the eye or top of the ears, and as close to the back of the head as is comfortable. Note: Some head restraints might not be adjustable.
No cuts and bulges, a minimum of 1.6mm of tread depth across the central three-quarters of the breadth of the tyre, and around the entire outer circumference of the tyre.
Explain you’d operate the switch (turn on ignition if necessary), then walk round vehicle (as this is a ‘tell me’ question, you don’t need to physically check the lights).
Warning light should illuminate if there is a fault with the anti-lock braking system.
Explain you’d operate the switch (turn on ignition if necessary), and then walk round vehicle (as this is a ‘tell me’ question, you don’t need to physically check the lights).
Explain you’d operate the brake pedal, make use of reflections in windows or doors, or ask someone to help.
If the steering becomes heavy, the system may not be working properly. Before starting a journey, 2 simple checks can be made:
Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate.
Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.
Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on. Explain use.
Operate switch (with ignition or engine on if necessary), check with main beam warning light.
Identify dipstick/oil level indicator, describe check of oil level against the minimum and maximum markers.
Identify high and low-level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level.
Identify reservoir, check level against high and low markings.